DOCUMENTS & QUALITY
Know what you’re
bringing home.
Product information you can inspect. Questions you can ask us directly.
Our standard
We obtain product documents and pursue independent analysis where it adds meaningful confidence. A certificate should match the equipment it describes. A performance claim should have a measurement behind it.
Each record below identifies its supplier and model coverage. Contact us for confirmation against your exact model and configuration.
Ice baths & chillers
YG-20-G5 · Supplier conformity document
UDEM document M.2025.206.C113210 lists YG-20-G5. This supplier-hosted copy refers to electrical safety and electromagnetic compatibility; it is not the full underlying test report.
Open supplier document ↗SY Pro chiller · User manual
Installation, operation and maintenance guidance, including model references for the 1.0 HP chiller. Always check the manual against the nameplate of the delivered unit.
Read supplier manual · PDF ↗The manual instructs users to switch the chiller off before entering the water and specifies dry placement, ventilation and operating limits.
SY-10-HC / SY-10-OC · Supplier ETL record
The supplier’s Intertek authorization-to-mark copy lists these chiller model names. An exact-model and configuration match is required before relying on it for a particular order.
Inspect the supplier record ↗Red light panels
RLPRO600MAX · Supplier EMC conformity document
Document ZTLJ2412207Z lists RLPRO600MAX as a supplementary model and references EMC test report ZTLJ2412207. It does not establish clinical effectiveness or an optical-safety result. The exact RL120MAX-7CH and RLPRO2000L names are not listed in this document.
Open conformity document · PDF ↗Need the documents for another model?
Ask us for the manual, installation requirements and applicable test documents for your selected ice bath, sauna or panel. We will confirm the records available for that exact configuration.
Request your model’s documents →Independent testing: what matters
Our testing priorities are electrical and installation safety, calibrated light output, cold-plunge temperature control and sauna temperature consistency. Completed independent reports should identify the exact sample, method and conditions.
This page does not claim that PEAKSPAN has completed those proposed tests. We will add results when reports are available and reviewed.
Document scope checked 6 September 2026. Supplier copies remain subject to issuer and delivered-model verification. Manufacturing-system certification and product certification are different records.